Signal adapter for Triumph Mo.Tri V.2 | Motogadget

Exclusively available at motogadget here is the signal adapter for Triumph Twin and Triple models with CAN bus technology!

Before the arrival of Mo.Tri , it was not possible to remove the original instruments on the Triumph 2-cylinder (2011-...) and 3-cylinder (2006-...) models. With the exception of the Triumph Breakout Box , exclusively designed for the Motoscope Pro , a motogadget computer could not be mounted on a Triumph.

Indeed, once the original instrument is disconnected, the integrated CAN bus of these models ceases to be operational. No modification is possible!

To solve this problem, Motogadget engineers designed the Mo.Tri , an exclusive from the German manufacturer for the Twin models.

The mo.tri transmits engine speed, speed, signals for indicator lights (flashing), low fuel indicator, error memory, high beam, neutral, high water temperature, pressure of oil. (Some of the indicator lights on 4 or 5 LED instruments are multifunctional.)

Its installation is particularly simple, almost Plug'n'Ride .

The original connector is used, and the instrument and indicator cables are connected to the mo.tri terminals using color codes:

• no soldering to do or cable detection;
• no modification of the wiring harness;
• no cancellation of vehicle warranty.

Please select the model of your Triumph and its year of manufacture.

Please note: the model year is not necessarily identical to the year of manufacture. The "11" position, (from the left), in the motorcycle identification number identifies the model year.

Examples:

• “8” = 2008;
• “A” = 2010;
• “B” = 2011;
• “C” = 2012;
• etc.

Triumph Mo.Tri Signal Adapter Dimensions

• length : 42mm;
• width : 42mm;
• height : 27 mm.

Scope of delivery

• Mo.Tri adapter;
• connector (corresponding to the selected model);
• end caps;
• 2 M3 screws;
• cable holder;
• cable ties.