Motoscope Classic SPEEDO speedometer | Motogadget
Regular price 479,00€Or 3 times 159,66€ with Alma
Free return within 30 days
2 years minimum warranty
The Motoscope Classic SPEEDO from Motogadget is an analog speedometer with a classic, round shape. It also integrates numerous digital functions revealed by a liquid crystal screen and 4 light-emitting diodes.
The red color speedometer is driven by a high precision stepper motor. The needle is perfectly stable, not subject to vibrations.
The Classic Speedo analog speedometer is handcrafted with premium materials. Strict quality control carried out by Motogadget guarantees the correct functioning of the device.
Its retro design is ideal for a prepared motorcycle, Café Racer, Scrambler etc. but the Speedo adapts perfectly to any type of production motorcycle.
The high-quality aluminum housing is machined from a single block (CNC technology). Its surface is brushed, then anodized in black or natural aluminum. The case is 100% waterproof . The bezel is made from scratch-resistant plastic. The widely used 80 mm dimensions make it easy to replace the original elements.
Analogue dial with indicator and LCD display
The meter offers exceptional readability whether analog or digital display, even under direct sunlight. A real advantage on a motorcycle. 4 ultra-bright LEDs complete the rev counter.
How the Speedo meter works
The LCD screen display pages are switched using the menu key. Different measurement values can be displayed at the touch of a button.
Namely : the default settings, the recorded values are memorized, but if the power is cut.
Sensors and connection
The supplied connection cable is approximately 55cm in length and the connectors are already pre-installed on the side of the meter.
The engine speed measurement connects easily to the ignition coil or ignition box. The speedometer sensor (included), made of stainless steel, is small (M5/22 mm). It attaches easily to the front or rear wheel (1.5 m connection cable).
Features of the Motoscope Classic Speedo
| Mounting diameter: | 80mm |
| Total diameter (bezel): | 85mm |
| Depth without cable connection: | 34mm |
| Weight : | approximately 230g |
| Assembly : | 3 M4 threaded holes |
| Power consumption in operation: | approx. 200 mA (depending on load) |
| Standby power consumption: | 0mA |
| Operating voltage: | 9V - 18V |
| Operating temperature : | -20°C...+80°C |
| Analog speedometer: | 0 - 200 km/h (or mph, top on LCD screen) |
| Daily counter: | 999 km or mi max. |
| Total distance (adjustable): | 250,000 km or mi max. |
| Displaying journey time: | 0 - 99:99:99 h/min/s |
| Rev counter (on the LCD screen): | 0 - 20,000 rpm |
| Adjustable rev threshold alert: | 0 - 20,000 rpm |
| On-board voltage display: | 9V - 18V |
| Water temperature* (optional instead of air temperature): | 40 - 120°C / 104 - 248°F with high/low warning |
| Oil temperature*: | 40 - 160 °C / 104 - 320 °F with high/low warning |
| Oil pressure*: | 0 - 8 bar / 0 - 116 psi with high/low warning |
| Timing: | 0 - 100 km/h or 0 - 60 mph 0.0 - 99.9 sec |
| Acceleration in progress: | (-20.0) - 20.0 m/s2 |
| Average speed : | 0 - 350 km/h or mph |
| Maximum speed : | 0 - 350 km/h or mph |
| RPM speed: | 0 - 20,000 rpm |
| Maximum positive acceleration: | 0 - 20.0 m/s2 |
| Maximum negative acceleration: | 0 - (-20.0) m/s2 |
| Speed indicator : | N, speeds 1 to 6 |
| Green light: | neutral (N) |
| Yellow light: | blinkers |
| Blue light: | Redlights |
| Red light: | various warning functions external (e.g. oil pressure switch), internal (speed, temperature, pressure, voltage) |
| External gear shift indicator output: | switched power 1.4 A max. |
Scope of delivery
- Motoscope Classic Speedo computer with connection cable of approximately 55 cm;
- complete wiring;
- fuse;
- speed sensor (M5) with 150 cm connection cable;
- 2 magnets;
- mini push button;
- 3x M4 screws (VA);
- Detailed installation and use instructions.
Please note : temperature and pressure sensors must be ordered separately.
