The ABE approved BMW R nine T pro motoscope is the only plug&ride computer on the market. The CAN-Bus interface of the Motoscope Pro allows you to display all the original functions (except the heated grip settings).
The LED matrix display offers an ultra-thin housing design. The 734 LEDs, controlled by a 16-bit RISC processor, generate a self-illuminating screen over almost the entire surface (very thin edges).
The brightness is automatically adapted and ensures optimal readability even in direct sunlight conditions.
The rev counter display is fully modular thanks to the analog LED strip. The primary display and secondary display are user configurable. Another display section shows the gear currently engaged.
Four indicator lights are pre-installed and can be used for multiple input signals.
The case is CNC machined from a single block of aluminum and is easily mounted using two threaded holes at the rear (see Motogadget MSP BMW 9T support ).
Compatible with BMW R nine T models
- 2014 ;
- 2015 ;
- 2016.
Not compatible with BMW R nine T models
- 2017 and later;
- Urban G/S;
- Pure;
- Racer;
- Scrambler.
Features of the Motoscope Pro BMW R nineT
Length : | 109mm |
Height : | 47mm |
Depth : | 11mm |
Weight : | about 100g |
Fixation : | 2 M3 threaded holes |
Power consumption during operation: | max. 200 mA (depending on load) |
Standby power consumption: | 0.4mA |
Operating voltage: | 9V - 15V |
Operating temperature : | -20°C...+80°C |
Rev counter (LED bargraph): | 0 - 6, 8, 10, 12, 14, 16, 18 krpm (adjustable) |
Speedometer : | 0 - 350 km/h or mph |
Daily counter A: | up to 999.9 km or mi |
Daily counter B: | up to 999.9 km or mi |
Total mileage (adjustable): | up to 250,000 km or mi |
Operating Hours/Service: |
0 - 9,999.5 h |
Clock : | 23:59 h/min |
Timing: | 0 - 99:59:59 h/min/s |
Rev counter (digital): | 0 – 20,000 rpm |
Adjustable RPM Warning (Shift Light): | 0 - 20,000 rpm |
On-board voltage: | 9 - 18V |
Low voltage warning: | warning below approximately 11 V |
Timing 0 - 100 km/h or 0 - 60 mph: | 0.00 - 30.59 sec |
Actual acceleration: | +/- 0.00 - 1.50 G |
Average speed : | 0 - 350 km/h or mph |
Max speed : | 0 - 350 km/h or mph |
Max speed RPM: | 0 – 20,000 rpm |
Maximum positive acceleration | +1.50G |
Maximum negative acceleration | - 1.50G |
Viewing the report: | N, ratio 1 - 6 |
Fuel/reserve: | alert indicator |
Green control LED: | neutral (N) |
Green control LED: | left/right turn signals |
Blue control LED: | high beam |
Red control LED: |
various warning functions like engine control, ABS, lack of fuel. |
Scope of delivery
- Motoscope pro with a connection cable of approximately 70 cm;
- 2 stainless steel screws;
- detailed assembly and user instructions.
Please note : the touch sensor is no longer included, the Heated-Grip-Control may not work.