Flasher relay Mo.Wave | Motogadget

The Mo.Wave is the first digital flasher relay to feature a fade-in / fade-out effect. Your indicators turn on and off smoothly, following the rhythm of a wave. You thus obtain an aesthetic operation, very different from the jerky cuts specific to LEDs in particular.

To install it, simply replace the original relay with the Mo.Wave. Please note, it cannot replace the controls of instruments equipped with push buttons (see Mo.Relay+ ).

If you want a flashing relay with automatic deactivation, opt for the Mo.Stop .

Harley-Davidson : the new Harley series are equipped with a special module for controlling the turn signals (TSM/TSSM). They cannot be replaced or supplemented by Mo.Wave .

Features of the Mo.Wave flasher relay

• unique fade in and fade out effect;
• ultra compact and lightweight;
• ideal for custom motorcycles and modifications with limited mounting space;
• the wiring can be hidden in the handlebars, in the frame tubes or in the electrical harness;
• almost independent of load (minimum 1 W);
• manufactured using digital semiconductor technology;
• microprocessor controlled;
• no mechanical operation, no coils, no electrical contacts;
• constant flashing frequency. Suitable for almost all LED turn signal models, all micro and halogen turn signals as well as all 10 W and 21 W turn signals;
• works with 4 turn signals or 2 handlebar indicators;
• instant, lossless and brighter activation of all indicators;
• trouble-free connection using just two cables, connect in series;
• waterproof;
• vibration-resistant due to molded construction;
• short circuit resistant, automatic overload protection;
• switching power: up to 100 W;
• no heat release during use;
• working voltage from 5V to 18V;
• compatible with 6 V indicators.

Dimensions of the Mo.Wave case

• length : 18mm;
• width : 13mm;
• height : 9.5mm;
• weight : approximately 4 g.

Availability

• 10 to 14 days.